Welcome to Telefly Telecommunications Equipment Co., Ltd

Network Products

Contact Us

You are here:Home >> Products >> Network Products... >> --Embedded Ethernet Switch...

--Embedded Ethernet Switch


10-port Layer 2 Embedded Managed Industrial Ethernet Switch

Features and Benefits
1.Support static multicast/IGMP Snooping
2.Support broadcast storm suppression/ Rate limit
3.Low power consumption design
4.Support power loss, fiber drop, broadcast storm alarm output
5.Support MW-Ring VLAN/Qos and other web management

    Product Description
    TELCOM7110S layer 2 embedded Industrial Ethernet Switch is a high-performance Ethernet embedded product developed by TELEFLY Communication for coal mine industry. The product uses high-performance industrial-grade switch chip and supports 2 Gigabit ports + 8x100M ports, especially suitable for large data traffic transmission applications. Meanwhile, TELCOM7100S also supports MW-Ring that independently developed by Mawe. Recovery time is less than 20 ms

    Features and Benefits
    -2 gigabit fiber ports +8x100M based-Fx/Tx Ports
    -Support 3 serial ports+ 2 CAN ports
    -Support MW-Ring with the recovery time<20ms
    -Support static multicast/IGMP Snooping
    -Support broadcast storm suppression/ Rate limit
    -Support industrial level power input with low power consumption design
    -support power loss, fiber drop, broadcaststorm alarm output
    -Support VLAN/Qos and other web management
    -Industrial grade wide temperature/ fanless


    Software performance

    Switch Function

    Support VLAN/IEEE 802.1Q VLAN

    Support port aggregation.

    Support flow control.

    Support Rate limit

    Support broadcast storm suppression.

    Redundancy protocol

    Support MW-Ring and the recovery time<20 ms.

    Support RSTP/STP 

    Security technology

    Support IEEE 802.1x

    Support HTTP/HTTPS

    Support RADIUS

    Support User rating

    Multicast routing

    Support IGMP snooping/ IGMP v1/v2

    Support GMRP/static multicast

    Service quality management

    Support Qos setting

    Support SP/ WRR queuing

    IP management

    Support DHCP server

    Management and maintenance

    Support Console and Web management methods

    Support SNMPv1/v2c

    Support software upgrade

    Support host computer IP/MAC conflict alarm

    Support power failure alarm/power alarm/port alarm/support port mirroring

    Support log viewing

    Support Link-check

    Support NTP

    Support accept frame transmission frame statistics

    Technical specifications

    Ethernet Standard


    IEEE802.3u (100Base-TX&100Base-FX)

    IEEE802.3x (Flow Control)

    IEEE802.3ab (1000Base-T)



    IEEE802.1w (RSTP)

    IEEE802.1Q (VLAN)

    IEEE802.1p (Priority)

    IEEE802.1xVisiting Control

    Switch properties

    Priority queue


    VLAN Number


    IGMP Groups


    MAC table


    Switch Bandwidth


    Switch Latency



    Gigabit ports

    Port numbers: 2

    Connector: Interface form: SFP optical port (LC interface, single / multi-mode optional) or 10/100 / 1000M adaptive copper module.

    Baud rate: 1000Base-LX(fiber port), 10/100/1000M for copper port

    100M ports

    Port numbers:8

    Connector: 1x9 fixed fiber port(single or multimode, SC/FC/ST available)or RJ45

    Baud rate:100Base-FX/ 10/100M-T(x) auto-negotiation RJ45 port

    Serial port

    Port number:2 RS232/RS485

    Interface form: 6 core with lock 3.81mm pitch signal wiring socket

    Port rate:300~115.2Kbps

    CAN port

    Port number:1

    Interface form: 6 core with lock 3.81mm pitch signal wiring socket

    Port rate:1 MB/s(MAX)

    Debugging port


    Terminal block for power input

    2 core with lock 5.08mm pitch signal wiring socket 

    Terminal block for relay alarm

    6-core with lock 5.08mm pitch alarm signal wiring socket, 2 power input alarm, 1 relay output alarm

    Communication distance


    100m(CAT5/CAT5e cable)

    Multimode fiber

    Gigabit multimode: 850nm  550m;

    10/100M multimode: 1310nm  2km;

    Single mode fiber

    Gigabit single mode: 1310nm 20km;

    10/100M single mode: 1310nm  20/40km;1550nm  60/80km;

    LED indicator lights

    Front panel LED

    Host computer running indicator

    System Running indicator

    Power States indicator

    CAN Data transmission and reception indicator

    Serial port Data transmission and reception indicator

    100M port indicator

    Power Requirements

    Power input

    DC12V/DC24V/DC48V available

    Full-load consumption


    Working Environment

    Operating Temperature


    Storage temperature


    Ambient Humidity

    5%~95%( non-condensing)

    Physical Characteristics




    Positioning hole installation




    Warranty period

    5 Years


    CE, FCC, RoHS



    Ordering information


    2 Gigabit fiber ports +8x10/100M copper ports + 3 RS485 ports + 2 CAN ports, single DC12/24 /48V power supply.


    2 Gigabit fiber ports + 1x100M fiber port + 7x10/100M copper ports + 3 RS485 ports + 2 CAN ports, single DC12 /24 / 48V power supply.


    2 Gigabit fiber ports + 2x100M fiber ports + 6x10/100M copper ports + 3 RS485 ports + 2 CAN ports, single DC12/24/48V power supply.


    2 Gigabit fiber ports + 3x100M fiber ports + 5x10/100M copper ports + 3 RS485 ports + 2 CAN ports, single DC12/24/ 48V power supply.


    2 Gigabit fiber ports + 4x100M fiber ports + 4x10/100M copper ports + 3 RS485 ports + 2 CAN ports, single DC12/24/ 48V power supply.

    Please submit your basic information, we will contact you as soon as possible!





Related products

Copyright © 2019 Telefly Telecommunications Equipment Co., Ltd All Rights Reserved.  
Web Design—Tiandixin